The total amount above $399, we offer free shipping and responsible for import duties.



Kinugawa Turbocharger TF06-18KX for SUBARU FA20 WRX Point Milling Bolt-On

Regular price $1,159.00



Description
Kinugawa FA20 turbocharger for the 2015+ Subaru WRX features the 18G, 20G, 16KX (aka 16K), and 18KX (aka 18K) compressor wheel with a stock fitment, stock appearing cover coupled to the 10.5 cm2 turbine section. This bolt-on solution produces a great balance of spool and power. This turbo comes with an oil line and gasket set, giving you everything you need to bolt it straight onto your car. The factory oil drain sump will be kept and reused, it is shown in pictures for fitment only and is not included.

Application
- Replace OEM # 14411AA880 / 14411-AA881
- Replace OEM # 14411AA880 / 14411-AA881
- 2012+ JDM Subaru Legacy 2.0GT DIT, 2014+ Subaru Levorg and 2015+ JDM Subaru WRX S4
- 2014-2018 USDM Subaru Forester badged as Forester XT
- 2014-2018 JDM Subaru Forester badged as Forester XT
- 2015+ USDM Subaru WRX
- Horsepower Range: 450~550WHP
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration

CHRA Size
- TF06-18KX

Wheels Spec
- -Compressor wheel: 55.1 / 75 mm (7+7 Point Milling / Third-Order Surface) 
This high-performance 75mm compressor blends quick response and top-end power with OE reliability. The billet 18KX billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades for a max flow rate of 54lb/min. This turbo is capable of producing 500+whp with a built engine and supporting modifications.



Kinugawa Turbo Systems Third-order surface compressor wheel
Free Surface Ruled Surface
Process Point Milling Flank Milling
Machining Time Slow 120 mins.each Quick 15 mins.each
Characters


1. Free Surface can be only produced by Point Milling
2. More air pressure and increase much better flow efficiency.
3. Mainly for high-efficiency turbochargers.

1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor

- Turbine wheel: 54 / 61.5 mm (9 blades sts)
Kinugawa STS Turbin Wheel
Note: The 9 blades STS (Superior Turbine Strike) turbine wheel. This will take a shorter time to build a boost and at higher RPM won't choke because it's less restrictive than an 11 or 12 blade turbine.

Bearing Type
- Journal Bearing with 360-Degree performance thrust bearing kit.

Turbine Housing
- Twin-Scroll 10.5cm^2

Cooling Type
- Oil and Water Cooling System

Actuator Pressure
1.0 bar default setting.
- We have 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar spring settings, Please add a comment to your order if you need to change it.

The set includes
- 1 x Oil supply set
- 1 x water supply and return pipe set
- 1 x Return Oil Pipeline
- 1 x turbine inlet and outlet gasket
- 8 x stud kits
- 1 x Balance Report with Anti-Counterfeit Tag 
Installation notice
You can straighten the pipe a little bit with a vice that you can prevent it from hitting the compressor cover and use the stock turbo sump.

Kinugawa FA20 turbo Install kit setup comes with stock turbo sump

Kinugawa FA20 Installation with stock turbo sump
Situation
- Brand New
- Full balance from SCHENK MBRS 110 Germany

Provider
- Kinugawa Turbo Systems

Guarantee
- One year

Kinugawa Turbo Systems Billet Compressor Wheel and 360 Dynamic Thrust Bearing
Kinugawa Turbo Systems Compressor Map TD02-TD08
Kinugawa Turbo Systems SCHENK Balancer
Kinugawa Turbo Systems Anti-Counterfeit Tag
`