Description
Kinugawa for SUBARU TD05H-16KX turbocharger with adjustable actuator AND STS (Superior Turbine Strike) 9 blades high flow turbine wheel, this twin-entry (not twin-scroll) edition features a journal-bearing cartridge, billet compressor wheel, and 10cm^2 housing. Because billet compressor wheel the overall weight of the wheel is lighter than competing turbochargers and allows for maximum airflow throughout the unit with the help of point milling on each blade.
Application
- It can replace IHI RHF5HB VF36 VF42, RHF55 VF37 without modification
- 2007MY WRX STI Spec C Type RA-Rs
- Horsepower Range: 350~450whp
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
Wheels Spec
- Compressor wheel: 49.6 / 68.0 mm 7+7 Point Milling / Third-order Surface


Free Surface | Ruled Surface | |
Process | Point Milling | Flank Milling |
Machining Time | Slow 120 mins.each | Quick 15 mins. each |
Characters |
1. Free Surface can be only produced by Point Milling |
1. Ruled Surface can be produced by Flank Milling 2. Low efficiency 3. Only suitable to the very easy design of compressor wheel 4. Mainly for fundamental mechanical engineering such as Centrifugal compressor |
Turbine wheel: 56 / 49.2 mm
Feature: The STS (Superior Turbine Strike) turbine wheel. It will take a shorter time (decrease 5-8%) to build a boost and, at higher RPM, prevent choking easier because it's less inertia and restrictive than an 11 or 12 blades turbine.
Compressor Housing
- Compressor inlet: 57.0 mm / 2.25 " AR .57
- Compressor outlet : 47.6 mm
Turbines Housing
- A/R: 10 cm / .73
- Twin Entry Flange to fit the stock manifold not Twin Scroll
Bearing Type
- Journal Bearing with a performance 360-degree thrust bearing kit
Cooling Type
- oil and water cooling
Actuator Pressure
- Default 1.0bar
-We have 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar drives, Please add a comment to your order if you need to change it.
The set includes
- 1 x Oil supply set
- 1 x water coolant and return pipe set
- 1 x turbine and outlet gasket
- 5 x Stud and nut sets
- 1 x Return Oil Pipeline
- 1 x Turbocharger
- 1 x Balance Report with Anti-Counterfeit Tag
Situation
- Brand New
- Complete SCHENCK balanced
Provider
-Kinugawa Turbo Systems
Guarantee
-One year
`