Application
- For the Nissan RB20DET / RB25DET R31 R32 R33 R34 Skyline
- Universal application: 2000 ~ 3500cc
- Horsepower range: 330~460WHP
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
CHRA Size
- TD05H-16KX (aka 16K)
Wheels Spec
- Compressor wheel: 49.6 / 68 mm (7+7 Point Milling / Third-Order Surface)
This high-performance 68mm compressor blends quick response and top-end power with OE reliability. The billet 16K (aka 16KX) billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades.


Free Surface | Ruled Surface | |
Process | Point Milling | Flank Milling |
Machining Time | Slow 120 mins.each | Quick 15 mins.each |
Characters |
1. Free Surface can be only produced by Point Milling |
1. Ruled Surface can be produced by Flank Milling 2. Low efficiency 3. Only suitable to the very easy design of compressor wheel 4. Mainly for fundamental mechanical engineering such as Centrifugal compressor |
- Turbine wheel: 56.0 / 49.2 mm
Feature: The STS (Superior Turbine Strike) turbine wheel. It will take a shorter time (decrease 5-8%) to build a boost and, at higher RPM, prevent choking easier because it's less inertia and restrictive than an 11 or 12 blades turbine.
Compressor Housing
- A/R .60
- Compressor inlet: 61 mm / 2.4"
- Compressor outlet: 51 mm / 2.0 "
Turbine Housing
- T3 inlet flange
- Internal wastegate
Bearing Type
- Journal Bearing with a 360-degree performance thrust bearing kit
Cooling Type
- oil and water cooling
Actuator Pressure
- 1.0 bar / 14.7 psi-drive is default
- 0.5bar, 0.8 bar, 1 bar, 1.2 bar, 1.5 bar, available 1.7 bar, and 2.0 bar, Please add a comment about your order if you need to change it.
Situation
- Brand New
The set includes
- 1 x Oil supply set
- 1 x drain pipe kit
- 2 X coolant supply line
- 2 x Turbine gasket (inlet + outlet)
- 6 x starting kit
`