Application
- For Nissan CA18DET Silvia S13 180SX/ 200SX (Europe)/ 240SX (North America)
- For Nissan SR20DET Silvia S13 S14 S15/ 200SX (AUS/NZ)/ 240SX (North America)
- Replace and refresh the stock for the Garrett T28 TURBO directly.
CHRA Size
TD05H-16KX
Wheels Spec
- Compressor wheel: 49.96 / 68.0 mm (7+7 Point-Milled)
This high-performance 68mm compressor blends quick response and top-end power with OE reliability. The billet 16KX billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades.


Free Surface | Ruled Surface | |
Process | Point Milling | Flank Milling |
Machining Time | Slow 120 mins.each | Quick 15 mins. each |
Characters |
1. Free Surface can be only produced by Point Milling |
1. Ruled Surface can be produced by Flank Milling 2. Low efficiency 3. Only suitable to the very easy design of compressor wheel 4. Mainly for fundamental mechanical engineering such as Centrifugal compressor |
Turbine wheel: 56 / 49.2 mm 9 Blades STS
Kinugawa Turbo Systems STS (Superior Turbine Strike) advanced cartridges come with dual ceramic ball bearing cages and 9 blades high flow turbine wheels improve the response speed (time needed to build boost) 10-15% as well as being more durable due to the improved shaft dynamics control. The increased power comes from the enhanced design. It utilizes an inner and outer race with rollers or balls between the two races. The inner race is pressed onto the turbo shaft, and the outer race is pressed into the CHRA. The rollers or balls replace the oil’s “job” of controlling the turbo shaft’s orientation but do still need to be lubricated but the oil restrictor had been defaulting embedded in the bearing housing to reduce oil supply more.
Turbines Housing A/R
8cm ^ 2 / .57
Compressor Housing
- A/R .60
- 3" inlet
- 2" outlet
Bearing Type
- Dual Ceramic Ball Bearing
Cooling Type
- oil and water cooling
Actuator Pressure
-1.0 bar / 14.7 psi-drive will go with Turbo.
-0.5 bar, 0.8 bar, 1 bar, 1.2 bar, 1.5 bar, available 1.7 bar, and 2.0 bar, Please add a comment about your order if you need to change it.
Max hp
300~450HP
The set includes
- 1 x turbine inlet/outlet gasket
- 1 x compressor input / Output gasket
- 1 x Return gasket
- 1 x Oil supply set
- 1 x Return Oil Pipeline
- 1 x water supply kit for water (6AN hose)
- 8 x cloves and nut set
- 1 x Balance Report with anti-counterfeit tag
Situation
Brand New
Provider
Kinugawa Turbo Systems
Guarantee
One year
`