Description
Application
- For 4G63T Mitsubishi Lancer EVO 1~3, Galant VR-4, DSM 1G / 2G, Eagle Talon, Plymouth Laser turbo upgrade
- Horsepower Range: 450~500HP
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
CHRA Size
- TD06SL2-25G
WHEEL SPEC
- Compressor Wheel: 60.5 / 78.0 mm (Billet 6+6 blades for low-end torque and Billet 11+0 blades for top-end speed)
- Turbine Wheel: 54.0 / 61.0 mm (9 Blades STS)
Features: The STS (Superior Turbine Strike) turbine wheel. It will take a shorter time (decrease 5-8%) to build a boost and, at higher RPM, prevent choking easier because it's less inertia and restrictive than an 11 or 12 blades turbine.
The STS Advanced ceramic dual ball bearing technology improves the response speed (time needed to build boost) by 10-15% and is more durable due to the improved shaft dynamics control.
Bearing Type
- STS Advanced (Dual Ceramic Ball Bearing)
Cooling Type
- oil and water cooling
The set includes
- 1 x CHRA
- 1 x banjo bolt w/ washer for turbo oil feed side
(#414-01101-008 + #416-01003-007*2)
- 1 x oil return gasket
(#413-02006-001)
- 2 x banjo bolts w/ washer for turbo water coolant side
(#414-01101-019*2 + #416-01003-008*4)
- 1 x Balance Report with Anti-Counterfeit Tag
Situation
- Brand New
- Full balance from Schenk MBRS 110 Germany
Provider
- Kinugawa Turbo Systems
Warranty
- No
- For 4G63T Mitsubishi Lancer EVO 1~3, Galant VR-4, DSM 1G / 2G, Eagle Talon, Plymouth Laser turbo upgrade
- Horsepower Range: 450~500HP
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
CHRA Size
- TD06SL2-25G
WHEEL SPEC
- Compressor Wheel: 60.5 / 78.0 mm (Billet 6+6 blades for low-end torque and Billet 11+0 blades for top-end speed)
- Turbine Wheel: 54.0 / 61.0 mm (9 Blades STS)
Features: The STS (Superior Turbine Strike) turbine wheel. It will take a shorter time (decrease 5-8%) to build a boost and, at higher RPM, prevent choking easier because it's less inertia and restrictive than an 11 or 12 blades turbine.
The STS Advanced ceramic dual ball bearing technology improves the response speed (time needed to build boost) by 10-15% and is more durable due to the improved shaft dynamics control.
Bearing Type
- STS Advanced (Dual Ceramic Ball Bearing)
Cooling Type
- oil and water cooling
The set includes
- 1 x CHRA
- 1 x banjo bolt w/ washer for turbo oil feed side
(#414-01101-008 + #416-01003-007*2)
- 1 x oil return gasket
(#413-02006-001)
- 2 x banjo bolts w/ washer for turbo water coolant side
(#414-01101-019*2 + #416-01003-008*4)
- 1 x Balance Report with Anti-Counterfeit Tag
Situation
- Brand New
- Full balance from Schenk MBRS 110 Germany
Provider
- Kinugawa Turbo Systems
Warranty
- No