Kinugawa Turbo 3" Anti-Surge TF06-18K for Nissan CA18DET SR20DET Silvia S13 S14 S15

(0)
Regular price
$1,079.00
Sale price
$1,079.00
Regular price
$1,079.00
Sold out
Unit price
Quantity must be 1 or more
2 units in stock

Description

Application

- For Nissan CA18DET Silvia S13 180SX/ 200SX (Europe)/ 240SX (North America)
- For Nissan SR20DET Silvia S13 S14 S15/ 200SX (AUS/NZ)/ 240SX (North America)
- Replace and refresh the stock for the Garrett T28 TURBO directly.

- Note: The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.



CHRA Size
-TF06-18K


Wheel Spec

- Compressor wheel: 55.1 / 75 mm (7+7 Point Milling / Third-Order Surface)
This high-performance 75mm compressor blends quick response and top-end power with OE reliability. The billet 18KX (aka 18K) billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades for a max flow rate of 54lb/min. This turbo is capable of producing 500+whp with a built engine and supporting modifications.


Free Surface Ruled Surface
Process Point Milling Flank Milling
Machining Time Slow 120 mins.each Quick 15 mins.each
Characters



1. Free Surface can be only produced by Point Milling
2. More air pressure and increase much better flow efficiency.
3. Mainly for high-efficiency turbochargers.

1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor






- Turbine wheel: 54 / 61.5 mm (TF06 / 9 blades STS. Click here to learn more about STS technology.↗)


COMPRESSOR HOUSING
- Nozzle area: AR.60
- Inlet: 3" anti-surge
- Outlet: 2"

TURBINE HOUSING
- Nozzle Area: 8 cm^2 / AR.57
- Inlet: T25
- Outlet: 5 bolt CA18DET / SR20DET style
- Wastegate: Internal gated

BEARING TYPE
- Journal Bearing with 360-degree performance thrust bearing

COOLING TYPE
- Oil and Water-Cooled

ACTUATOR PRESSURE
- 1.0 bar / 14.7 Psi is the default.
- Please add a note or contact us if you need to change to 0.3 bar, 0.5 bar, 0.8 bar, 1.2 bar, 1.5 bar, 1.7 bar, or 2.0 bar actuator.






















The set includes
- 1 x turbine inlet/outlet gasket
- 1 x compressor input / Output gasket
- 1 x Return gasket
- 1 x Oil supply set
- 1 x Return Oil Pipeline
- 1 x water supply kit for water (6AN hose)
- 8 x cloves and nut set
- 1 x Turbocharger


[CA18DET Silvia S13 180SX/ 200SX Install Kit Instruction]

[SR20DET Silvia S13 S14 S15/ 200SX Install Kit Instruction]



Situation
- Brand New


Provider
- Kinugawa Turbo Systems


WARRANTY

- For complete peace of mind, Kinugawa Turbo Systems offers a KINUGAWA TROUBLE-FREE WARRANTY for 1 year from the purchase date to the original purchaser. If, for any reason, your turbocharger/s fails or has an issue, you can return it to us for a free overhaul and recondition or replacement depending on availability or the turbo problem. You can be assured that KINUGAWA has covered you no matter the issue.



Go to full site