Description
Kinugawa Turbocharger 2.4" Cover TD04HL-19T 6cm T25 Greddy type 4-Bolt Internal Gated for Universal
APPLICATION
- 1.5~2L petrol engine
- 2.5~4L diesel engine
- For Greddy TD04H / TD04HL Turbo Kit
- Horsepower Range: 250~300HP
Note: The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
WHEEL SPEC
- Compressor Wheel: 46 / 58 mm
(The 6+6 blade is better for low-end torque; the 11+0 blade is for top-end speed)
- Turbine Wheel: 52.0 / 45.6 mm
(3 types available: STD, STS, STS55. Click here to learn more about STS technology.↗)
COMPRESSOR HOUSING
- Inlet: 2.4" non anti-surge
- Outlet: 2"
TURBINE HOUSING
- Nozzle Area: 6cm^2 / AR.42
- Inlet: T25
- Outlet: Greddy type 4 bolt
- Wastegate: Internal gated
- 1.5~2L petrol engine
- 2.5~4L diesel engine
- For Greddy TD04H / TD04HL Turbo Kit
- Horsepower Range: 250~300HP
Note: The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
WHEEL SPEC
- Compressor Wheel: 46 / 58 mm
(The 6+6 blade is better for low-end torque; the 11+0 blade is for top-end speed)
- Turbine Wheel: 52.0 / 45.6 mm
(3 types available: STD, STS, STS55. Click here to learn more about STS technology.↗)
COMPRESSOR HOUSING
- Inlet: 2.4" non anti-surge
- Outlet: 2"
TURBINE HOUSING
- Nozzle Area: 6cm^2 / AR.42
- Inlet: T25
- Outlet: Greddy type 4 bolt
- Wastegate: Internal gated
BEARING TYPE
- Journal Bearing
COOLING TYPE
- Oil and Water-Cooled
ACTUATOR PRESSURE
- 1.0 bar / 14.7 Psi is the default.
- Please add a note or contact us if you need to change to 0.3 bar, 0.5 bar, 0.8 bar, 1.2 bar, 1.5 bar, 1.7 bar, or 2.0 bar actuator.
KIT INCLUDES
- 1 x turbocharger
- 1 x oil feed line kit
- 1 x water coolant feed and return line kit
- 1 x turbine inlet and outlet gasket set
- 1 x oil return pipe kit
- 4 x stud and nut set
- 1 x tee fitting
- 1 x turbine outlet flange (#412-02002-007)
- 1 x Balance report with anti-counterfeit tag↗
PRODUCT SITUATION
- Brand New
PROVIDER
- Kinugawa Turbo Systems
WARRANTY
- One Year
- For complete peace of mind, Kinugawa Turbo Systems offers a KINUGAWA TROUBLE-FREE WARRANTY for 1 year from the purchase date to the original purchaser. If, for any reason, your turbocharger/s fails or has an issue, you can return it to us for a free overhaul and recondition or replacement depending on availability or the turbo problem. You can be assured that KINUGAWA has covered you no matter the issue.
