Description
Applications:
- Fits 4G63T Mitsubishi Lancer EVO 1~3, Galant VR-4, DSM 1G / 2G, Eagle Talon, Plymouth Laser bolt-on directly
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), representing the potential flywheel power. This product's performance results depend highly on your vehicle’s modifications and tuning/calibration.
- Inlet: stock 2.5″
- Outlet: stock 2-bolt
Turbine Housing
- Nozzle Area: 7cm
- Inlet: Mitsubishi single scroll
- Outlet: Mitsubishi 4-bolt
- Wastegate: internal gated with 34mm wastegate flapper
Bearing Type
- Journal Bearing 360-degree with Performance Thrust Bearing Kits with large thrust rings and Flingers
Cooling Type
- Oil and water cooling
Actuator Pressure
- 1.0 bar / 14.7 Psi is the default.
- Please add a note or contact us if you need to change to 0.3 bar, 0.5 bar, 0.8 bar, 1.2 bar, 1.5 bar, 1.7 bar, or 2.0 bar actuator.
Situation
- Brand New
The set includes
- 1 x turbocharger
- 1 x oil feed line kit
- 1 x oil return line kit
- 1 x water feed and return line kit
- 1 x turbine In&out gaskets
- 1 x Balance Report with Anti-Counterfeit Tag
Provider
- Kinugawa Turbo Systems
[Install kit instruction]
- Fits 4G63T Mitsubishi Lancer EVO 1~3, Galant VR-4, DSM 1G / 2G, Eagle Talon, Plymouth Laser bolt-on directly
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), representing the potential flywheel power. This product's performance results depend highly on your vehicle’s modifications and tuning/calibration.
Wheels Spec
- Compressor wheel: 52.3 / 68.0 mm (6+6 blades for low-end torque and 11+0 blades for top-end speed)
- Turbine wheel: 56.0 / 49.2 mm (3 types offered: STD, STS, STS55. Click here to learn more about STS technology.)
- Inlet: stock 2.5″
- Outlet: stock 2-bolt
Turbine Housing
- Nozzle Area: 7cm
- Inlet: Mitsubishi single scroll
- Outlet: Mitsubishi 4-bolt
- Wastegate: internal gated with 34mm wastegate flapper
Bearing Type
- Journal Bearing 360-degree with Performance Thrust Bearing Kits with large thrust rings and Flingers
Cooling Type
- Oil and water cooling
Actuator Pressure
- 1.0 bar / 14.7 Psi is the default.
- Please add a note or contact us if you need to change to 0.3 bar, 0.5 bar, 0.8 bar, 1.2 bar, 1.5 bar, 1.7 bar, or 2.0 bar actuator.
Situation
- Brand New
The set includes
- 1 x turbocharger
- 1 x oil feed line kit
- 1 x oil return line kit
- 1 x water feed and return line kit
- 1 x turbine In&out gaskets
- 1 x Balance Report with Anti-Counterfeit Tag
Provider
- Kinugawa Turbo Systems
[Install kit instruction]
Warranty
- For complete peace of mind, Kinugawa Turbo Systems offers a KINUGAWA TROUBLE-FREE WARRANTY for 1 year from the purchase date to the original purchaser. If, for any reason, your turbocharger/s fails or has an issue, you can return it to us for a free overhaul and recondition or replacement depending on availability or the turbo problem. You can be assured that KINUGAWA has covered you no matter the issue.