Description
Application
- For Mitsubishi TD04L Turbo P/N: 49377-04100 / 49377-04200 / 49377-04300 / 49377-04502 / 49377-04504 / 49377-04505
- For SUBARU S/P: 14412AA360 / 14412-AA140 / 14412-AA360 / 14412-AA451 / 14412-AA532 / 14412-AA560
- For SUBARU 1999 ~ 2008 Forester XT 58T SG9 EJ205 EJ255
- For 1998~99 Subaru IMPREZA WRX GDA GGA EJ205 EJ255
- For 2002~07 Subaru IMPREZA WRX GDA GGA EJ205 EJ255
- For Mitsubishi TD04L Turbo P/N: 49377-04100 / 49377-04200 / 49377-04300 / 49377-04502 / 49377-04504 / 49377-04505
- For SUBARU S/P: 14412AA360 / 14412-AA140 / 14412-AA360 / 14412-AA451 / 14412-AA532 / 14412-AA560
- For SUBARU 1999 ~ 2008 Forester XT 58T SG9 EJ205 EJ255
- For 1998~99 Subaru IMPREZA WRX GDA GGA EJ205 EJ255
- For 2002~07 Subaru IMPREZA WRX GDA GGA EJ205 EJ255
- For 2004~06 Subaru Baja XT BT EJ255
- For 2005~06 Saab 9-2X Aero GGA EJ205 EJ255
- Note: The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
- For 2005~06 Saab 9-2X Aero GGA EJ205 EJ255
- Note: The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
CHRA Size
- TD04L-13T
Wheels Spec
- Compressor wheel: 40.7 / 56 mm (Billet 6+6 blades for low-end torque and Billet 11+0 blades for top-end speed)
- Turbine wheel: 47 / 41.3 mm (2 types offered: STD, STS. Click here to learn more about STS technology.)
Turbines Housing
- Nozzle area: 6cm / AR.41
- Inlet: Subaru single scroll
- Outlet: Subaru 5-bolt
- Wastegate: internal gated
- Inlet: Subaru single scroll
- Outlet: Subaru 5-bolt
- Wastegate: internal gated
Bearing Type
- Journal Bearing
Cooling Type
- Oil and water cooling
Actuator Pressure
- 1.0 bar / 14.7 Psi is the default.
- Please add a note or contact us if you need to change to 0.3 bar, 0.5 bar, 0.8 bar, 1.2 bar, 1.5 bar, 1.7 bar, or 2.0 bar actuator.
- Please add a note or contact us if you need to change to 0.3 bar, 0.5 bar, 0.8 bar, 1.2 bar, 1.5 bar, 1.7 bar, or 2.0 bar actuator.
The set includes
- 1 x Oil supply set
- 1 x Water supply and return pipe set
- 1 x Return Oil Pipeline
- 1 x turbine inlet and outlet gasket
- 5 x Stud And Nut Set
- 1 x Turbocharger
Situation
- Brand
- Full balance from SCHENCK MBRS 110 Germany
Provider
- Kinugawa Turbo Systems
Warranty
- For complete peace of mind, Kinugawa Turbo Systems offers a KINUGAWA TROUBLE-FREE WARRANTY for 1 year from the purchase date to the original purchaser. If, for any reason, your turbocharger/s fails or has an issue, you can return it to us for a free overhaul and recondition or replacement depending on availability or the turbo problem. You can be assured that KINUGAWA has covered you no matter the issue.