Description
Application
The upgrade turbo for VOLVO 850/S60/S70/V70/XC70/C70/T5-R B5234/T3/T4/T6, B5254T/T2, N2P20FT, N2P20LT, N2P23FT, N2P23HT, N2P25LT with factory TD04HL-13G/15G/16T/18T and the adjustable-position plate compressor cover.
- Replace & Upgrade factory turbo #: 49189-01310, 49189-01320 (TD04HL-15G), 49189-01330, 49189-01335, 49189-01350, 49189-01355 (TD04HL-16T), 49189-01360, 49189-01365, (TD04HL-13G), 49189-01370, 49189-01375 (TD04HL-18T), 49189-01400, 49189-01401, 49189-01410, 49189-01420, 49189-01430, 49189-01435 (TD04HL-13T), 49189-01450, 49189-01455 (TD04HL-16T-6)
- 1998- Volvo S70 with N2P23FT Engine
- 1998- Volvo XC70 with B5254T Engine
- 1996- Volvo 850 with N2P23FT Engine
- Volvo S70, V70 T5, with B5234 Engine
- 1997- Volvo 850, C70 with N2P23HT Engine
- 1996- Volvo 850 Engine B5254T
- 1996- Volvo C70 I 2.4L T5 Engine B5254T
- 1996- Volvo S70 2.5L T5 Engine B5254T
- 1996- Volvo V70 2.5L T5 Engine B5254T
- 1998- Volvo S70, XC70 Car with B5254T2 Engine
- 1998- Volvo S60 T5, S70R, V70R with N2P23HTR Engine
- 2000- Volvo S60 with B2534 T4 Engine
- 1997- Volvo 850 T5 with N2P20FT Engine (49189-01400)
- 1996- Volvo 850 with N2P20FT, N2P20LT Engine (49189-01420)
- 1998~2005 Volvo C70 with B5204 T3 engine (49189-01450, 49189-01455)
- Replace & Upgrade factory turbo #: 49189-01310, 49189-01320 (TD04HL-15G), 49189-01330, 49189-01335, 49189-01350, 49189-01355 (TD04HL-16T), 49189-01360, 49189-01365, (TD04HL-13G), 49189-01370, 49189-01375 (TD04HL-18T), 49189-01400, 49189-01401, 49189-01410, 49189-01420, 49189-01430, 49189-01435 (TD04HL-13T), 49189-01450, 49189-01455 (TD04HL-16T-6)
- 1998- Volvo S70 with N2P23FT Engine
- 1998- Volvo XC70 with B5254T Engine
- 1996- Volvo 850 with N2P23FT Engine
- Volvo S70, V70 T5, with B5234 Engine
- 1997- Volvo 850, C70 with N2P23HT Engine
- 1996- Volvo 850 Engine B5254T
- 1996- Volvo C70 I 2.4L T5 Engine B5254T
- 1996- Volvo S70 2.5L T5 Engine B5254T
- 1996- Volvo V70 2.5L T5 Engine B5254T
- 1998- Volvo S70, XC70 Car with B5254T2 Engine
- 1998- Volvo S60 T5, S70R, V70R with N2P23HTR Engine
- 2000- Volvo S60 with B2534 T4 Engine
- 1997- Volvo 850 T5 with N2P20FT Engine (49189-01400)
- 1996- Volvo 850 with N2P20FT, N2P20LT Engine (49189-01420)
- 1998~2005 Volvo C70 with B5204 T3 engine (49189-01450, 49189-01455)
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
CHRA Size
- TD04HL-15T/16T/19T/20T
Wheels Spec
- Compressor wheel: 4 types offered
250-320HP (15T 42/56 mm Trim 56) for Gasoline
270-330HP (16T 43.4/56 mm Trim 60) for Gasoline
300-350HP (19T 46/56 mm Trim 63) for Gasoline
320-370HP (20T 47/56 mm Trim 66) for Gasoline
(11+0 designed for top-end speed and 6+6 for low-end torque)
250-320HP (15T 42/56 mm Trim 56) for Gasoline
270-330HP (16T 43.4/56 mm Trim 60) for Gasoline
300-350HP (19T 46/56 mm Trim 63) for Gasoline
320-370HP (20T 47/56 mm Trim 66) for Gasoline
(11+0 designed for top-end speed and 6+6 for low-end torque)
- Turbine wheel: 45.6 / 52 mm (3 types offered: STD, STS, STS 55. Click here to learn more about STS technology.)
Bearing Type
- Journal Bearing with 360-degree performance thrust bearing kit
Cooling Type
- Oil and water cooling
Turbine Housing
- 6cm (AR.41) straight flange
Cooling Type
- Oil and water cooling
Actuator Pressure
- 1.0 bar is the default.
- Please add a note or contact us if you need to change to 0.3 bar, 0.5 bar, 0.8 bar, 1.2 bar, 1.5 bar, 1.7 bar, or 2.0 bar actuator.
BOV or BCV
- Compressor cover with a factory-type BCV, or optionally an adjustable blow-off valve (BOV) or recirculating valve (BCV). (Click here to learn about the difference between BOV and BCV.↗)
- The suggestion of BOV/BCV spring is according to the wastegate actuator spring pressure range.
- 1 x Green spring: 5~15 Psi (0.3~1.0 Bar) (default installation)
- 1 x Yellow spring: 15~23 Psi (1.0~1.5 Bar)
- 1 x Blue spring: 23~30 Psi (1.5~2.0 Bar)
- Journal Bearing with 360-degree performance thrust bearing kit
Cooling Type
- Oil and water cooling
Turbine Housing
- 6cm (AR.41) straight flange
Cooling Type
- Oil and water cooling
Actuator Pressure
- 1.0 bar is the default.
- Please add a note or contact us if you need to change to 0.3 bar, 0.5 bar, 0.8 bar, 1.2 bar, 1.5 bar, 1.7 bar, or 2.0 bar actuator.
BOV or BCV
- Compressor cover with a factory-type BCV, or optionally an adjustable blow-off valve (BOV) or recirculating valve (BCV). (Click here to learn about the difference between BOV and BCV.↗)
- The suggestion of BOV/BCV spring is according to the wastegate actuator spring pressure range.
- 1 x Green spring: 5~15 Psi (0.3~1.0 Bar) (default installation)
- 1 x Yellow spring: 15~23 Psi (1.0~1.5 Bar)
- 1 x Blue spring: 23~30 Psi (1.5~2.0 Bar)
Situation
- Brand New
The set includes
- 1 x turbocharger
- 1 x factory-type BCV or adjustable billet BCV / BOV (3 options)
- 1 x factory-type BCV or adjustable billet BCV / BOV (3 options)
Provider
- Kinugawa Turbo Systems
- For complete peace of mind, Kinugawa Turbo Systems offers a KINUGAWA TROUBLE-FREE WARRANTY for 1 year from the purchase date to the original purchaser. If, for any reason, your turbocharger/s fails or has an issue, you can return it to us for a free overhaul and recondition or replacement depending on availability or the turbo problem. You can be assured that KINUGAWA has covered you no matter the issue.
