Description
Description
Is the factory turbocharger feeling a little tired? Or if you are ready to make a little more power without going way over the top, then you will be pleased with the turbocharger. This is a great upgrade for those of you looking to make more power while maintaining a great low-range to mid-range response. This particular turbocharger is capable of producing up to 450whp on a healthy engine with an excellent throttle response. This is a great option for street and track duties.
Application
- 2002-2014 Subaru WRX
- 2004-2016 Subaru WRX STI vehicles
- 2004-2007 Subaru Forester
- It can replace TD04L WRX turbo, for IHI VF30, vf35 ... turbo.
- Turbo with 3" inlet cover, the compressor inlet pipe needs to be modified.
- Turbo with 3" inlet cover, the compressor inlet pipe needs to be modified.
- Horsepower range: 400~450 WHP
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
CHRA Size
-TD05H-20G
Wheels Spec
- Compressor wheel: 52.3 / 68 mm (Billet 6+6 blades for low-end torque and Billet 11+0 blades for top-end speed)
- Turbine wheel: 56.0 / 49.2 mm
Feature: The STS (Superior Turbine Strike) turbine wheel. It will take a shorter time (decrease 5-8%) to build a boost and, at higher RPM, prevent choking easier because it's less inertia and restrictive than an 11 or 12 blades turbine.
Compressor Housing AR60
- Compressor inlet : 3" hose coupler
- Compressor outlet: 2.0" hose coupler
Turbine Housing
A/R: 7cm / 8cm /10cm
Bearing Type
- Journal Bearing Systems with 360-degree thrust bearing kit
Cooling Type
- Water and Oil Cooling System
Actuator Pressure
- 1.0 bar is a default setup
- Available to 0.3bar, 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar, Please add a comment to your order if you must change it.
The set includes
- 1 x Oil supply set
- 1 x water supply and return pipe set
- 1 x Return Oil Pipeline
- 1 x turbine inlet and outlet gasket
- 9 x Stud And Nut Set
- 1 x Turbocharger
- 1 x Balance report with an anti-counterfeit tag
Situation
- Brand New
- Full balance from Schenk MBRS110 Germany
Provider
- Kinugawa Turbo Systems
Guarantee
-One year
