The total amount is above $399, we offer free shipping and are responsible for import duties.



Kinugawa Turbocharger 3" Anti Surge TF06-18KX Stage 2 for HYUNDAI GENESIS COUPE Forged Pistions

Regular price $1,079.00



Description

- 10~12 Hyundai Genesis Coupe 2.0T BK1 (Bolt-on to replace factory TD04L turbo directly without modification. )
- 13~14 Hyundai Genesis Coupe 2.0T BK2 (Use the stock BK1 manifold and aftermarket O2 housings like ISR or MXP, please check the following case study)
- Horsepower Range: 400-450WHP

The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.

Wheels Spec
 
-This high-performance 75mm compressor blends quick response and top-end power with OE reliability. The billet 18KX billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades for a max flow rate of 54lb/min. This turbo is capable of producing 500+hp with a built engine and supporting modifications.
Ruled Surface Free Surface
Process Flank Milling Point Milling
Machining Time Quick 15 mins.each Slow 120 mins.each
Characters 1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor
1. Free Surface can be only produced by Point Milling
2. More air pressure and increase much better flow efficiency.
3. Mainly for high efficiency turbochargers.

- Turbine wheels: 56 / 49  mm 
 Feature: The STS (Superior Turbine Strike) turbine wheel. It will take a shorter time (decrease 5-8%) to build a boost and, at higher RPM, prevent choking easier because it's less inertia and restrictive than an 11 or 12 blades turbine.
Bearing Type
- Journal Bearing with 360-degree performance thrust bearing kit

Cooling Type
- Oil and water cooling

Compressor Housing
- A/R 60 (inlet: 3" Anti-surge / outlet: 2")
An Anti-surge housing is a good " analog" way of curing part throttle surge issues on big turbo/mbc setups. It's why most really big turbos come with anti-surge housings, to begin with. 


Turbine Housing 
- A/R: 8cm / .57

Cooling Type
- Oil and water cooling

Situation
- Brand New

The set includes
- 1 x turbocharger with adjustable actuator
- 1 x oil and water kit
- 1 x gasket set turbine housing in/out
- 4 x 86.5mm oversize pistons and rings ( Free Gift) 
Kinugawa Turbo Genesis Coupe 2.0t forged pistons set

kinugawa turbo genesis turbo forged pistons
kinugawa turbo hyundai genesis coupe forged pistons
Note: 86.5mm bore which the pistons to wall clearance 0.003mm 

- 1 x Balance Report with Anti-Counterfeit Tags

Case Study
You can use the stock 2010~12 BK1 manifold and the aftermarket O2 housings like ISR or MXP to convert these 3" cover turbochargers on 2013~14 BK2. 
Replacement o2 housing (1st catalytic converter pipe) for the 2010-2012 Genesis Coupe 2.0L to free up valuable horsepower! Direct bolt-up to the OEM turbo and connect to the OEM or aftermarket downpipe.
kinugawa turbo hyundai genesis bk1 applied on bk2
kinugawa turbo hyundai genesis bk2 with 3" anti-surge bk1

Provider
- Kinugawa Turbo Systems

Guarantee
- One year
Kinugawa STS Turbin Wheel


Kinugawa Turbo Systems Compressor Map TD02-TD08
Kinugawa Turbo Systems SCHENK Balancer
Kinugawa Turbo Systems Anti-Counterfeit Tag
`