The total amount is above $399, we offer free shipping and are responsible for import duties.



Kinugawa Turbo Ball Bearing STS Advanced TD06H-18K for Mitsubishi 4B11T EVO X 10 RS GSR GST SE RALLIART

Regular price $1,479.00



Application
- For Mitsubishi 4b11T EVO 10 / EVO X
Japanese models: RS, GST
- North American models: GRS, MR, MR Premium, MR Touring, SE, Final Edition

- UK cars kept the Evolution X name. GS, GSR SST, FQ-300, FQ-330, FQ-360, FQ-400, FQ400 MR

    Horsepower range
    - 450-600WPH 
    The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
    Wheels Spec:
    - Compressor wheel: 55.1 / 75 mm Third-order surface
    This high-performance 75mm compressor blends quick response and top-end power with OE reliability. The billet 18KX (aka 18K) billet compressor wheel utilizes its latest generation aero with 7 primary blades and 7 splitter blades for a max flow rate of 54lb/min. This turbo can produce 550+hp with a built engine and supporting modifications.
    - Compressor wheel: 55.1 / 75 mm (7+7 Point Milling / Third-Order Surface) 
    Free Surface Ruled Surface
    Process Point Milling Flank Milling
    Machining Time Slow 120 mins.each Quick 15 mins. each
    Characters


    1. Free Surface can be only produced by Point Milling
    2. More air pressure and increase much better flow efficiency.
    3. Mainly for high-efficiency turbochargers.

    1. Ruled Surface can be produced by Flank Milling
    2. Low efficiency
    3. Only suitable to the very easy design of compressor wheel
    4. Mainly for fundamental mechanical engineering such as Centrifugal compressor
    Kinugawa Turbo Systems Third-order surface compressor wheel
    - Turbine wheel: 58.8 / 67.2 mm (T06H turbine wheel STS)
    Feature: The STS (Superior Turbine Strike) turbine wheel. It will take a shorter time (decrease 5-8%) to build a boost and, at higher RPM, prevent choking easier because it's less inertia and restrictive than an 11 or 12 blades turbine.
    Turbines Housing (Thermal Resistant)
    - 12cm ^ 2 double-scrolling turbine housing 22% Hi-NI 

    Bearing Type
    - Dual Ceramic Ball Bearing

    Cooling systems
    - Oil and water cooling

    Actuator Pressure
    - 1.0 bar / 14.7 psi Default.
    - 0.5bar, 0.8 bar, 1 bar, 1.2 bar, 1.5 bar, available 1.7 bar, and 2.0 bar; please add a comment about your order if you need to change it.

    Situation
    - Brand New

    The set includes
    - 1 x Oil set for oil supply
    - 1 x Return Oil Pipeline
    - 1 x water coolant and return kit (6an / large hose)
    - 1 x Turbine gasket kit
    - 1 x Turbocharger
    1 x Balance Report with Anti-Counterfeit Tag 

    Provider
    - Kinugawa Turbo Systems

    Guarantee
    - One year
    Kinugawa STS Turbin Wheel

    Kinugawa Turbo Systems STS Advanced Fast SpoolKinugawa Turbo Systems STS Advanced Ball Bearing



    Kinugawa Turbo Systems SCHENK Balancer
    Kinugawa Turbo Systems Anti-Counterfeit Tag
    `