The total amount is above $399, we offer free shipping and are responsible for import duties.



Kinugawa Turbo 3" Anti Surge TF06-18K for Nissan RB20DET RB25DET R31 R32 R33 R34 Stage 2

Regular price $1,099.00



Description
This high-performance 75mm compressor blends quick response and top-end power with OE reliability. The billet 18KX billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades for a max flow rate of 54lb/min. This turbo is capable of producing 500+hp with a built engine and supporting modifications.

Application
- For the Nissan RB20DET / RB25DET Skyline R32 R33 R34
- Universal application: 2000 ~ 3500cc
- Horsepower Range: 450~550whp
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.

CHRA Size
- TF06-18K (aka 18KX)

Wheels Spec
- Compressor wheel: 55.1 / 75 mm (7+7 Point Milling)

Kinugawa Turbo Systems Third-order surface compressor wheel
Free Surface Ruled Surface
Process Point Milling Flank Milling
Machining Time Slow 120 mins.each Quick 15 mins.each
Characters


1. Free Surface can be only produced by Point Milling
2. More air pressure and increase much better flow efficiency.
3. Mainly for high-efficiency turbochargers.

1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor
- Turbine wheel: 56.0 / 49.2 mm 
Feature: The STS (Superior Turbine Strike) turbine wheel. It will take a shorter time (decrease 5-8%) to build a boost and, at higher RPM, prevent choking easier because it's less inertia and restrictive than an 11 or 12 blades turbine.

Compressor Housing
- A/R .60
- Compressor inlet: 80.5 mm / 3.15"
- Compressor outet: 51 mm / 2.0 "

Turbine Housing 
- T3 inlet flange
- Internal wastegate

Bearing Type
- Journal Bearing with a 360-degree performance thrust bearing kit

Cooling Type
- oil and water cooling

Actuator Pressure
- 1.0 bar / 14.7 psi-drive is default
- 0.5bar, 0.8 bar, 1 bar, 1.2 bar, 1.5 bar, available 1.7 bar and 2.0 bar, Please add a comment about your order if you need to change it.

Situation
Brand New

The set includes
- 1 x Oil supply set
- 1 x drain pipe kit
- 2 X coolant supply line
- 2 x Turbine gasket (inlet + outlet)
- 6 x starting kit
Situation
- Brand New
- Full balance from Schenk MBRS110 Germany

Provider
- Kinugawa Turbo Systems

Guarantee
-One year
Kinugawa STS Turbin Wheel
Kinugawa Turbo Systems Billet Compressor Wheel and 360 Dynamic Thrust Bearing
Kinugawa Turbo Systems Compressor Map TD02-TD08

Kinugawa Turbo Systems SCHENK Balancer
`