APPLICATION
- 500~1000 c.c. petrol engine
- 250~500 c.c. two-wheel motorcycle, Snow Bike, Scooter, ATV
- 1000~2000 c.c. diesel engine.
- Small displacement engines, including power sports, personal watercraft, and automobiles
- Horsepower Range: 150~200hp.
Note: The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
ITEM SPEC
- MHI P/N : 49173-06300
- BMW: 2248060
- Turbo spec: TD025L3-08T
- Compressor wheel: 33 / 44.0 mm (cast 6+6 blades)
- Compressor housing inlet/outlet: 1.8"/1.54"
- Turbine wheel: 36.5 / 32.2 mm (11 blades)
- Turbine housing A/R: 3.3cm
- Turbine housing inlet/outlet: 3 bolts / 3 bolts
COOLING
- Oil cooling only
BEARING SYSTEM
- Journal bearing
ACTUATOR PRESSURE
- 1.0 bar / 14.7 Psi is the default.
- We can provide 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar actuator, please add a comment on your order if you need to change it.
THE SET INCLUDES
- 1 x turbocharger
- 1 x banjo bolt kit for turbo oil feed side
- 1 x turbine inlet and outlet gasket set
- 1 x turbine inlet and outlet flange set
- 1 x oil return pipe kit
SITUATION
- Brand New
PROVIDER
- Mitsubishi Heavy Industry, Japan
- 500~1000 c.c. petrol engine
- 250~500 c.c. two-wheel motorcycle, Snow Bike, Scooter, ATV
- 1000~2000 c.c. diesel engine.
- Small displacement engines, including power sports, personal watercraft, and automobiles
- Horsepower Range: 150~200hp.
Note: The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
ITEM SPEC
- MHI P/N : 49173-06300
- BMW: 2248060
- Turbo spec: TD025L3-08T
- Compressor wheel: 33 / 44.0 mm (cast 6+6 blades)
- Compressor housing inlet/outlet: 1.8"/1.54"
- Turbine wheel: 36.5 / 32.2 mm (11 blades)
- Turbine housing A/R: 3.3cm
- Turbine housing inlet/outlet: 3 bolts / 3 bolts
COOLING
- Oil cooling only
BEARING SYSTEM
- Journal bearing
ACTUATOR PRESSURE
- 1.0 bar / 14.7 Psi is the default.
- We can provide 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar actuator, please add a comment on your order if you need to change it.
THE SET INCLUDES
- 1 x turbocharger
- 1 x banjo bolt kit for turbo oil feed side
- 1 x turbine inlet and outlet gasket set
- 1 x turbine inlet and outlet flange set
- 1 x oil return pipe kit
SITUATION
- Brand New
PROVIDER
- Mitsubishi Heavy Industry, Japan