Description
Application
- For 4G63T Mitsubishi Lancer EVO 1~3, Galant VR-4, DSM 1G / 2G, Eagle Talon, Plymouth Laser turbo upgrade
- Horsepower Range: 380~450HP
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), representing the potential flywheel power. This product's Performance results depend highly on your vehicle’s modifications and tuning/calibration.
CHRA Size
- TD05H-16K
WHEEL SPEC
- Compressor Wheel: 49.5 / 68.0 mm ( Point Milling / Third-order Surface)
This high-performance 68mm compressor blends quick response and top-end power with OE reliability. The billet 16KX (aka 16K) billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades.
| Free Surface | Ruled Surface | |
| Process | Point Milling | Flank Milling |
| Machining Time | Slow 120 mins.each | Quick 15 mins.each |
| Characters | 1. Free Surface can be only produced by Point Milling 2. More air pressure and increase much better flow efficiency. 3. Mainly for high-efficiency turbochargers. | 1. Ruled Surface can be produced by Flank Milling |
- Turbine Wheel: 49.2 / 56.0 mm (9 Blades STS)
Features: The STS (Superior Turbine Strike) turbine wheel. It will take a shorter time (decrease 5-8%) to build a boost and, at higher RPM, prevent choking easier because it's less inertia and restrictive than an 11 or 12 blades turbine.kinugawa sts turbine wheel wide range exhaust power drive.
The STS Advanced ceramic dual ball bearing technology improves the response speed (time needed to build boost) by 10-15% and is more durable due to the improved shaft dynamics control.
Features: The STS (Superior Turbine Strike) turbine wheel. It will take a shorter time (decrease 5-8%) to build a boost and, at higher RPM, prevent choking easier because it's less inertia and restrictive than an 11 or 12 blades turbine.kinugawa sts turbine wheel wide range exhaust power drive.
The STS Advanced ceramic dual ball bearing technology improves the response speed (time needed to build boost) by 10-15% and is more durable due to the improved shaft dynamics control.
Bearing Type
- STS Advanced (Dual Ceramic Ball Bearing)
Cooling Type
- oil and water cooling
The set includes
- 1 x CHRA
- 1 x banjo bolt w/ washer for turbo oil feed side
- 1 x oil return gasket
- 2 x banjo bolts w/ washer for turbo water coolant side
- 1 x Balance Report with Anti-Counterfeit Tag
Situation
- Brand New
- Full balance from Schenk MBRS 110 Germany
Provider
- Kinugawa Turbo Systems
Warranty
- No