This high-performance 75mm compressor blends quick response and top-end power with OE reliability. The billet 18KX billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades for a max flow rate of 54lb/min. This turbo is capable of producing 500+hp with a built engine and supporting modifications. It’s a substantial performance upgrade over stock – with easy to install stock fitment. The estimated engine output with this turbo is around 450WHP, but you can make 525-550whp+ with ethanol, fuel pump upgrade, manifold, intake, and custom tune.
- 2002-2014 Subaru WRX
- 2004-2016 Subaru WRX STI vehicles
- 2004-2007 Subaru Forester
- It can replace TD04L WRX turbo, for IHI VF30, vf35 ... turbo directly without modification
-TF06 18KX Dual Ceramic Ball Bearing
- Compressor wheel: 55.1 / 75 mm (7+7 Point Milling / Third-Order Surface)
||Ruled Surface||Free Surface|
|Process||Flank Milling||Point Milling|
|Machining Time||Quick 15 mins.each||Slow 120 mins.each|
|Characters||1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor
|1. Free Surface can be only produced by Point Milling
2. More air pressure and increase much better flow efficiency.
3. Mainly for high efficiency turbochargers.
- Turbine wheel: 54 / 61.5 mm TF06 STS 9 Blades
Compressor Housing AR60
- 2.4" Compressor inlet
- 2.0″ hose coupler outlet
High-Ni Thermal resistant
- Dual Ceramic Ball Bearing
-Oil and Water Cooling System
- 1.0 bar default setting.
-We have 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar spring settings, Please add a comment to your order if you need to change it.
The set includes
-1 x Oil supply set
-1 x water supply and return pipe set
-1 x Return Oil Pipeline
-1 x turbine inlet and outlet gasket
-5 x Stud And Nut Set
-1 x Balance Report with Anti-Counterfeit Tag
-Full balance from SCHENK MBRS 110 Germany
-Kinugawa Turbo Systems