- Brand: KINUGAWA
- Features:Strengthen / Replace Turbo Chargers & Parts
- For car makes / model: Subaru WRX STi GRF
- Manufacturer: Kinugawa
- Compressor Wheel: Billet or Cast
- Turbine Wheel: 12 Blades STD or 9 Blades STS
Is the factory turbocharger feeling a little tired? Or if you are ready to make a little more power without going way over the top, then you will be pleased with the Kinugawa TD05H-16KX Turbocharger. This is a great upgrade for those of you looking to make more power while maintaining a great low-range to the mid-range response. This particular turbocharger is capable of producing up to 400WHP on a healthy engine with excellent throttle response. This is a great option for street and
- Replacement for Stock TD04 49377-04502 (14412AA451), TD05H 49178-06310 (14412AA091, 14412AA092), etc
- Replace EJ25 USDM Subaru STI IHI RHF55 VF39 VF43 VF48 / RHF5HB Turbo
- EJ25 Subaru WRX STi GRF Single Scroll Turbo
- 2008-2014 Subaru Impreza WRX STI Hatchback
- 2010 Subaru Impreza WRX STI Special Edition Hatchback
- 2011-2014 Subaru Impreza WRX STI Limited Sedan
- 2011-2014 Subaru Impreza WRX STI Limited Hatchback
- 2011-2014 Subaru Impreza WRX STI Sedan
- 2015 Subaru Impreza (Base)t modification (bolt-on turbo)
- Compressor wheel: 49.96 / 68.0 mm
This high-performance 68mm compressor blends quick response and top-end power with OE reliability. The billet 16KX billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades.
|Ruled Surface||Free Surface|
|Process||Flank Milling||Point Milling|
|Machining Time||Quick 15 mins.each||Slow 120 mins.each|
|Characters||1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor
|1. Free Surface can be only produced by Point Milling
2. More air pressure and increase much better flow efficiency.
3. Mainly for high efficiency turbochargers.
- Turbine wheel: 56.0 / 49.2 mm
- Compressor inlet: 2.25 "
- Compressor outlet: 2.0"
- Size of nozzle: 7 or 8 cm.
- Turbine input: for Subaru One select the type
- Turbine outlet: for Subaru One select the type
- Journal Bearing with 360-degree thrust bearing kit
- oil and water cooling
- 1.0bar is the default.
-We have 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar drives, Please add a comment to your order if you need to change it.
Boost / hp
- Horsepower 350~400whp
-The Max boost is limited: 2.8bar
-Preposed beat: 1.5bar
The set includes
- 1 x Oil supply set
- 1 x water supply and return pipe set
- 1 x Return Oil Pipeline
- 1 x turbine inlet and outlet gasket
- 5 x Stud And Nut Set
-Full balance from Schenk MBRS 110 Germany
-Kinugawa Turbo Systems