The total amount above $399, we offer free shipping and responsible for import duties.



Kinugawa STS Advanced Ball Bearing Turbocharger TD05H-16K 7/7 Point Milling for SUBARU IMPREZA WRX STi 98~08

Regular price $1,299.00



Description
Is the factory turbocharger feeling a little tired? Or if you are ready to make a little more power without going way over the top, then you will be pleased with the Kinugawa TD05H-16KX Turbocharger. This is a great upgrade for those of you looking to make more power while maintaining a great low-range to mid-range response. This particular turbocharger is capable of producing up to 450WHP on a healthy engine with excellent throttle response. This is a great option for street and
track duties
Application
- For 1998~99 Subaru EJ20 EJ25 IMPREZA WRX / WRX STi GC8
- For 2002~07 Subaru EJ20 EJ25 IMPREZA WRX / WRX STi GDA / GDB 
- It can replace TD04L WRX directly without modification (bolt-on turbo)
- Horsepower Range: 400~450WPH
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.

CHRA Size
- TD05H-16KX

Wheels Spec
- Compressor wheel: 49.6 / 68.0 mm 

Kinugawa Turbo Systems Third-order surface compressor wheel
Free Surface Ruled Surface
Process Point Milling Flank Milling
Machining Time Slow 120 mins.each Quick 15 mins. each
Characters


1. Free Surface can be only produced by Point Milling
2. More air pressure and increase much better flow efficiency.
3. Mainly for high-efficiency turbochargers.

1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor
This high-performance 68mm compressor blends quick response and top-end power with OE reliability. The billet 16KX billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades.
- Turbine wheel: 56.0 / 49.2 mm 9 blades sts
Kinugawa STS Turbin Wheel
Kinugawa Turbo Systems STS (Superior Turbine Strike) advanced cartridges come with dual ceramic ball bearing cages and 9 blades high flow turbine wheels improve the response speed (time needed to build boost) 10-15% as well as being more durable due to the improved shaft dynamics control. The increased power comes from the enhanced design. It utilizes an inner and outer race with rollers or balls between the two races. The inner race is pressed onto the turbo shaft, and the outer race is pressed into the CHRA. The rollers or balls replace the oil’s “job” of controlling the turbo shaft’s orientation but do still need to be lubricated but the oil restrictor had been defaulting embedded in the bearing housing to reduce oil supply more.

Compressor Housing
- Compressor inlet: 2.25 "
- Compressor outlet: 2.0"
- Stock factory A/R for faster spool

Turbine Housing Hi-Ni Thermal Resistant
- AR.49 / 7cm, AR.57 / 8cm, AR.73 10cm
Kinugawa Subaru Turbocharger Turbine Map

Bearing Type
- Dual Ceramic Ball Bearing 

Cooling Type
- Water and Oil Cooling System

Actuator Pressure
1.0 bar is a default setup
- Available to 0.3bar, 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar, Please add a comment to your order if you must change it.


The set includes

- 1 x oil feed line kit

- 1 x water coolant feed and return line kit

- 1 x oil return pipe kit

- 1 x turbine inlet and outlet gasket set

- 5 x stud and nut set

- 1 x Balance Report with Anti-counterfeit Tag

Situation
- Brand New
- Full balance from Schenk MBRS110 Germany

Provider
- Kinugawa Turbo Systems

Guarantee
-One year


Kinugawa Turbo Systems STS Advanced Fast SpoolKinugawa Turbo Systems STS Advanced Ball Bearing



Kinugawa Turbo Systems SCHENK Balancer
Kinugawa Turbo Systems Anti-Counterfeit Tag


`