Application:
- Fits Engine Capacity: 1.4~2.4 Petrol / 2.8~4.5L Diesel
- Horsepower range: 350~400WHP
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
- Compressor wheel: 49.6 / 68 mm Point Milling Free Surface
|
Free Surface |
Ruled Surface |
| Process |
Point Milling |
Flank Milling |
| Machining Time |
Slow 120 mins.each |
Quick 15 mins. each |
| Characters |
1. Free Surface can be only produced by Point Milling
2. More air pressure and increase much better flow efficiency.
3. Mainly for high-efficiency turbochargers.
|
1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor |
Turbine wheel: 56 / 49.2 mm 9 Blades STS
Kinugawa Turbo Systems STS (Superior Turbine Strike) advanced cartridges come with dual ceramic ball bearing cages and 9 blades high flow turbine wheels improve the response speed (time needed to build boost) 10-15% as well as being more durable due to the improved shaft dynamics control. The increased power comes from the enhanced design. It utilizes an inner and outer race with rollers or balls between the two races. The inner race is pressed onto the turbo shaft, and the outer race is pressed into the CHRA. The rollers or balls replace the oil’s “job” of controlling the turbo shaft’s orientation but do still need to be lubricated but the oil restrictor had been defaulting embedded in the bearing housing to reduce oil supply more.
Compressor Housing
- A/R .57
- Inlet/outlet: 2.4"/ 2"
Turbines Housing
- A/R: 8cm ^ 2 / .57
Bearing Type
- Dual Ceramic Ball Bearing
Cooling Type
- Oil and water cooling
Actuator - Default 1.0bar / 14.7 psi
- We also can provide 0.5bar, 0.8bar, 1.2bar, 1.5bar,1.7bar, and 2.0bar actuator, please leave a comment when you ordered if you need to change it.
Situation
Brand New
The set includes
- 1 x oil and water kit
- 1 x gasket set turbine housing in/out
- 1 x 3 inches v-band adapter (optional)
- 1 x Balance Report with Anti-Counterfeit Tags
Provider
Kinugawa Turbo Systems
Guarantee
One year
