The total amount above $399, we offer free shipping and responsible for import duties.



Kinugawa Turbocharger 3" Anti Surge TD05H-16K Point Milling 7cm Bolt-on for Toyota Land Cruiser 1HZ Ultimate Fast Spool

Sale price $999.00 Regular price $999.00



Description
Kinugawa Toyota 1HZ diesel td05h-16kx(aka 16k) spec turbocharger with 3" anti-surge cover and 7cm Bolt-on turbine housing provide ultimate spool time than ever. The turbocharger is equipped with CT26 base turbine housing (inlet and outlet type) the same as the factory turbocharged 1HDT Land Cruiser engine. If you have an HZJ80 series, a factory 3″ exhaust system will fit straight on, the turbocharger is the same bolt pattern as the factory turbocharger, and in the same factory location. HZJ75, HZJ79, HZJ105 models will require an exhaust shop to connect. Some exhaust system companies already make a Turbocharger exhaust for these models but please check with your local exhaust shop.

Application

- Kinugawa TOYOTA 1HZ 4.2L Diesel 300HP Limited

- 75/78/79/80/100 series TD05H-16KX with 7cm Bolt-on turbine housing for fast spool


CHRA Size
- TD05H-16KX 

Wheels Spec
- Compressor wheel: 49.5 / 68.0 mm Point Milling / Third-order Surface
This high-performance 68mm compressor blends quick response and top-end power with OE reliability. The billet 16KX billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades.



Kinugawa Turbo Systems Third-order surface compressor wheel
Free Surface Ruled Surface
Process Point Milling Flank Milling
Machining Time Slow 120 mins.each Quick 15 mins.each
Characters


1. Free Surface can be only produced by Point Milling
2. More air pressure and increase much better flow efficiency.
3. Mainly for high-efficiency turbochargers.

1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor
Turbine wheel: 56 / 49.2 mm 
Note: The 9 blades STS (Superior Turbine Strike) turbine wheel. This will take a shorter time to build a boost and at higher RPM won't choke because it's less restrictive than an 11 or 12 blade turbine.

Compressor Housing
- Compressor inlet: 3 " Anti-surge AR 60 with Speed Sensor Port
Turbines Housing
- A/R: 7cm (.49) CT26 Bolt-on fast spool

 Bearing Type
- Journal Bearing system with 360-degree performance thrust bearing  

Cooling Type
- oil and water cooling

Actuator Pressure
- Default 1.0bar The drive will go with the turbo.
- We have 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar drives, Please add a comment to your order if you need to change it.

Actuator Pressure
-  Default 1.0barWe offer 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar spring preinstalled, too. Please add a comment to your order if you need to change it.

Boost Level
- The peak pressure setup is limited: 2.8bar
- Suggested pressure setup: 1.5bar

The set includes
- 1 x Oil supply set
- 1 x water coolant and return set
- 1 x  ct26 gasket set
- 1 x Turbocharger
- 1 x Balance Report with Anti-Counterfeit Tag

Situation
- Brand New
- Full balance from Schenk MBRS 950 110 Germany
Provider
- Kinugawa Turbo Systems

Guarantee
-One year

 

Kinugawa STS Turbin Wheel
Kinugawa Turbo Systems Billet Compressor Wheel and 360 Dynamic Thrust Bearing
Kinugawa Turbo Systems Anti-Counterfeit Tag
`