The total amount above $399, we offer free shipping and responsible for import duties.



Kinugawa Turbocharger 3" Anti-Surge Point Milling Thrid-Surface TF06-18K for Mitsubishi 4B11T EVO 10 X Bolt-on Turbine Housing

Regular price $1,209.00



Application
- For Mitsubishi 4b11T EVO 10 / EVO X
Japanese models: RS, GST
- North American models: GRS, MR, MR Premium, MR Touring, SE, Final Edition

- UK cars kept the Evolution X name. GS, GSR SST, FQ-300, FQ-330, FQ-360, FQ-400, FQ400 MR

- Horsepower Range: 450~550wph 

The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration

    Wheels Spec
    - Compressor wheel: 55.1 / 75 mm Point Milling Third-Surface

    This high-performance 75mm compressor blends quick response and top-end power with OE reliability. The billet 18KX billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades for a max flow rate of 54lb/min. This turbo is capable of producing 500+hp with a built engine and supporting modifications.



    Kinugawa Turbo Systems Third-order surface compressor wheel
    Free Surface Ruled Surface
    Process Point Milling Flank Milling
    Machining Time Slow 120 mins.each Quick 15 mins.each
    Characters


    1. Free Surface can be only produced by Point Milling
    2. More air pressure and increase much better flow efficiency.
    3. Mainly for high-efficiency turbochargers.

    1. Ruled Surface can be produced by Flank Milling
    2. Low efficiency
    3. Only suitable to the very easy design of compressor wheel
    4. Mainly for fundamental mechanical engineering such as Centrifugal compressor
    - Turbine wheel: 54 / 61.5 mm (TF06 turbine wheel STS)
    Feature: The STS (Superior Turbine Strike) turbine wheel. It will take a shorter time (decrease 5-8%) to build a boost and, at higher RPM, prevent choking easier because it's less inertia and restrictive than an 11 or 12 blades turbine.

    Turbines Housing
    - A/R 12cm ^ 2 Twin-scroll turbine housing with Ni 22% turbine housing which endures higher temperature

    Bearing Type
    - Journal Bearing embedded with 360-degree Performance Thrust Bearing Kits (large thrust rings and Flingers)

    Cooling systems
    - Oil and water cooling

    Actuator Pressure
    - 1.0 bar / 14.7 psi Default.
    - 0.5bar, 0.8 bar, 1 bar, 1.2 bar, 1.5 bar, available 1.7 bar, and 2.0 bar, please add a comment about your order if you need to change it.

    Situation
    - Brand New

    The set includes
    - 1 x Oil set for oil supply
    - 1 x Return Oil Pipeline
    - 1 x water coolant and return kit (6an / large hose)
    - 1 x Turbine gasket kit
    - 1 x Turbocharger
    1 x Balance Report with Anti-Counterfeit Tag  

    Provider
    - Kinugawa Turbo Systems

    Guarantee
    - One year

    Kinugawa Turbo Systems Billet Compressor Wheel and 360 Dynamic Thrust Bearing
    Kinugawa Turbo Systems Compressor Map TD02-TD08
    tf06-7 18k kinugawa compressor map

    Kinugawa Turbo Systems SCHENK Balancer
    Kinugawa Turbo Systems Anti-Counterfeit Tag

    `