|Free Surface||Ruled Surface|
|Process||Point Milling||Flank Milling|
|Machining Time||Slow 120 mins.each||Quick 15 mins.each|
1. Free Surface can be only produced by Point Milling
|1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor
- For the Nissan RB20DET / RB25DET Skyline
- Universal application: 2000 ~ 3500cc
- Horsepower range: 350 ~ 400WHPThe maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
- Compressor wheel: 49.6 / 68 mm (7+7 Point Milling / Third-Order Surface)
This high-performance 68mm compressor blends quick response and top-end power with OE reliability. The billet 16KX billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades.
- Turbine wheel: 54 / 61.5 mm (9 blades sts)
Note: The 9 blades STS (Superior Turbine Strike) turbine wheel. This will take a shorter time to build a boost and at higher RPM won't choke because it's less restrictive than an 11 or 12 blade turbine.
- A/R .60
- Compressor inlet: 61 mm / 2.4"
- Compressor outlet: 51 mm / 2.0 "
- T3 inlet flange
- Internal wastegate
- Journal Bearing with a 360-degree performance thrust bearing kit
- oil and water cooling
-1.0 bar / 14.7 psi-drive is default
-0.5bar, 0.8 bar, 1 bar, 1.2 bar, 1.5 bar, available 1.7 bar, and 2.0 bar, Please add a comment about your order if you need to change it.
The set includes
- 1 x Oil supply set
- 1 x drain pipe kit
- 2 X coolant supply line
- 2 x Turbine gasket (inlet + outlet)
- 6 x starting kit