|Free Surface||Ruled Surface|
|Process||Point Milling||Flank Milling|
|Machining Time||Slow 120 mins.each||Quick 15 mins. each|
1. Free Surface can be only produced by Point Milling
|1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor
- Fits for Nissan TD42 Patrol Safari GR GQ Y60, GU Y61 TD42T engine
- Fits for Radius Fabrications TD42 Low Mount Turbo Manifold comes with a
T3 turbo flange.
Note: Kinugawa has come up with the perfect combination of performance and ease of fitment. The advantage of this bolt-on kit is that it suits most aftermarket intercooler kits currently on the market, with minimal modifications
- Compressor wheel: 49.96 / 68.0 mm (7+7 Point-Milled)
This high-performance 68mm compressor blends quick response and top-end power with OE reliability. The billet 16KX (aka 16K) billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades.
Turbine wheel: 56 / 49.2 mm
Note: The STS (Superior Turbine Strike) turbine wheel. This will take a shorter time to build a boost and at higher RPM won't choke because it's less restrictive than an 11 or 12 blades turbine.
- Compressor inlet: 3" Anti-surge AR 60
- A/R: 6 cm .41
- Turbine input: T3
- Turbine outlet: TD42 bolt-on to the stock dump pipe
- Journal bearing system with 360-degree thrust bearing kit
- oil cooling
- 1.0bar The drive will go with the turbo.
- We have 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar drives, Please add a comment to your order if you need to change it.
The set includes
- 1 x Oil supply set
- 1 x T3 gasket
- 1 x TD42 Turbine outlet gasket
- 1 x Turbocharger
- 1 x Kinugawa Balance Report with an Anti-counterfeit Tag
- Brand New
- Full balance from Schenk MBRS110 Germany
- Kinugawa Turbo System
- One year