Application
- Fits TOYOTA 1HZ 4.2L Diesel 75/78/79/80/100 series 320HP is limited. You need an exhaust manifold with a T3 flange if you want to install this turbocharger on a 1HZ Engine.
- Fits DTS Turbo Kit for 1HZ 75/80/100 series. Product code: HZJ75 DTS, 1HZ DTS, 100 DTS.
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
CHRA Size
- TD05H-20G
Wheels Spec
- Compressor wheel: 52.3 / 68.0 mm (The 6+6 blades are better for low-end torque and the 11+0 type is for top-end speed)
- Turbine wheel: 56 / 49.2 mm
Feature: The STS (Superior Turbine Strike) turbine wheel. It will take a shorter time (decrease 5-8%) to build a boost and, at higher RPM, prevent choking easier because it's less inertia and restrictive than an 11 or 12 blades turbine.
Compressor Housing
- Compressor inlet: 3 " Anti-surge AR 60
Turbines Housing
- A/R: 6 cm .41
- Turbine input: T3
- Turbine outlet: 3" v-Band internal wastegate
Bearing Type
- Journal bearing system with 360-degree performance thrust bearing kit
Cooling Type
- oil and water cooling
Actuator Pressure
- Default 1.0bar. We offer 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar spring preinstalled, too. Please add a comment to your order if you need to change it.
Boost Level
- The peak pressure setup is limited: 2.8bar
- Suggested pressure setup: 1.5bar
The set includes
- 1 x Oil supply set
- 1 x water coolant and return set
- 1 x T3 gasket
- 1 x V-Clamp and V-Band Socket Adapter Kit
- 1 x Turbocharger
- 1 x Balance Report with Anti-Counterfeit Tag
Situation
- Brand New
- Full balance from Schenk MBRS 950110 Germany
Provider
-Kinugawa Turbo Systems
Guarantee
-One year
You might also like
From
$899.00
From
$899.00
`