- Kinugawa TOYOTA 1HZ 4.2L Diesel 330HP Limited
- 75/78/79/80/100 series TD05H-16KX with 6cm T3 V-Band Turbine housing, You need an exhaust manifold with a T3 flange if you want to install this turbocharger on a 1HZ Engine.
- Fits DTS Turbo Kit for 1HZ 75/80/100 series. Product code: HZJ75 DTS, 1HZ DTS, 100 DTS.
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
- Compressor wheel: 49.6 / 68.0 mm Point Milling Third-order Surface. This high-performance 68mm compressor blends quick response and top-end power with OE reliability. The billet 16K (aka 16KX) billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades.
||Slow 120 mins.each
||Quick 15 mins. each
1. Free Surface can be only produced by Point Milling
2. More air pressure and increase much better flow efficiency.
3. Mainly for high-efficiency turbochargers.
|1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor
- Turbine wheel: 56 / 49.2 mm
Note: The 9 blades STS (Superior Turbine Strike) turbine wheel. This will take a shorter time to build a boost and at higher RPM won't choke because it's less restrictive than an 11 or 12 blade turbine.
- Compressor inlet: 3 " Anti-surge AR 60 with Speed Sensor Port
- A/R: 6 cm .41
- Turbine input: T3
- Turbine outlet: 2.5" v-Band internal wastegate
- Journal bearing system with 360-degree performance thrust bearing kit
- oil and water cooling
- Default 1.0bar. We offer 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar spring preinstalled, too. Please add a comment to your order if you need to change it.
- The peak pressure setup is limited: 2.8bar
- Suggested pressure setup: 1.5bar
The set includes
- 1 x Oil supply set
- 1 x water coolant and return set
- 1 x T3 gasket
- 1 x V-Clamp and V-Band Socket Adapter Kit 2.5"
- 1 x Turbocharger
- 1 x Balance Report with Anti-Counterfeit Tag
- Brand New
- Full balance from Schenk MBRS 950 110 Germany
-Kinugawa Turbo Systems