- Brand: KINUGAWA
- For car makes / model: Subaru
- Features:Strengthen / Replace Turbo Chargers & Parts
- Accommodation on the vehicle: Equipment Engines
- Manufacturer: Kinugawa Turbo Systems
- Turbine Housing: 10.5 cm
- Compressor Wheel: Billet 7+7 Blade
- Turbine Wheel: Inconel 713
- Horsepower Range: 450~500hp
Kinugawa FA20 turbocharger for the 2015+ Subaru WRX features the 18G, 20G, 16KX and 18KX compressor wheel with a stock fitment, stock appearing cover coupled to the 10.5 cm2 turbine section. This bolt-on solution produces a great balance of spool and power. This turbo comes with an oil line and gasket set, giving you everything you need to bolt it straight onto your car. The factory oil drain sump will be kept and reused, it is shown in pictures for fitment only and is not included.
Note: The turbo is developed specifically for the 2015+ WRX platform, it will not fit any other platform with the FA20 motor. Additionally, it will not fit any vehicle with the EJ series of motors.
Replace OEM # 14411AA880 / 14411-AA881
- -Compressor wheel: 55.1 / 75 mm (7+7 Point Milling / Third-Order Surface)
This high-performance 75mm compressor blends quick response and top-end power with OE reliability. The billet 18KX billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades for a max flow rate of 54lb/min. This turbo is capable of producing 500+hp with a built engine and supporting modifications.
|Ruled Surface||Free Surface|
|Process||Flank Milling||Point Milling|
|Machining Time||Quick 15 mins.each||Slow 120 mins.each|
|Characters||1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor
|1. Free Surface can be only produced by Point Milling
2. More air pressure and increase much better flow efficiency.
3. Mainly for high efficiency turbochargers.
- Turbine wheel: 54 / 61.5 mm (9 blades)
- Dual Ceramic Ball Bearing
- Twin-Scroll 10.5cm^2
-Oil and Water Cooling System
- 1.0 bar default setting.
- We have 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar spring settings, Please add a comment to your order if you need to change it.
The set includes
-1 x Oil supply set
-1 x water supply and return pipe set
-1 x Return Oil Pipeline
-1 x turbine inlet and outlet gasket
-8 x stud kits
-1 x Balance Report with Anti-Counterfeit Tag
-Full balance from SCHENK MBRS 110 Germany
-Kinugawa Turbo Systems