Description
- 10~12 Hyundai Genesis Coupe 2.0T BK1 (Bolt-on to replace factory TD04L turbo directly without modification. )
- 13~14 Hyundai Genesis Coupe 2.0T BK2 (Use the stock BK1 manifold and aftermarket O2 housings like ISR or MXP, please check the following case study) without modification.
- Horsepower Range: 350-420WHP
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
Wheels Spec
- Turbine wheels: 61 / 54.1 mm 9 Blades STS
Kinugawa Turbo Systems STS (Superior Turbine Strike) advanced cartridges come with dual ceramic ball bearing cages and 9 blades high flow turbine wheels improve the response speed (time needed to build boost) 10-15% as well as being more durable due to the improved shaft dynamics control. The increased power comes from the enhanced design. It utilizes an inner and outer race with rollers or balls between the two races. The inner race is pressed onto the turboshaft, and the outer race is pressed into the CHRA. The rollers or balls replace the oil’s “job” of controlling the turbo shaft’s orientation but do still need to be lubricated but the oil restrictor had been defaulting embedded in the bearing housing to reduce oil supply more.
- Compressor wheel: 52.3 / 68 mm (The 6+6 blades are better for low-end torque and the 11+0 type is for top-end speed)
Bearing Type
- Dual Ceramic Ball Bearing
Cooling Type
- Oil and water cooling
Compressor Housing
- A/R 60 (inlet: 3" Anti-surge / outlet: 2")
An Anti-surge housing is a good " analog" way of curing part throttle surge issues on big turbo/mbc setups. It's why most really big turbos come with anti-surge housings, to begin with.
Turbine Housing
- A/R: 8cm / .57
Cooling Type
- Oil and water cooling
Actuator Pressure
- 1.0bar is the default.
- We have 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar drives, Please add a comment to your order if you need to change it.
Situation
- Brand New
The set includes
- 1 x turbocharger with adjustable actuator
- 1 x oil and water kit
- 1 x gasket set turbine housing in/out
- 4 x 86.5mm oversize pistons and rings ( Free Gift)
Note: 86.5mm bore which the pistons to wall clearance 0.003mm
- 1 x Balance Report with an Anti-Counterfeit Tag
Case Study
You can use the stock 2010~12 BK1 manifold and the aftermarket O2 housings like ISR or MXP to convert these 3" cover turbochargers on 2013~14 BK2.
Replacement o2 housing (1st catalytic converter pipe) for the 2010-2012 Genesis Coupe 2.0L to free up valuable horsepower! Direct bolt-up to the OEM turbo and connect to the OEM or aftermarket downpipe.
Provider
- Kinugawa Turbo Systems
Guarantee
- One year
You might also like
`