The total amount is above $399, we offer free shipping and are responsible for import duties.



Kinugawa STS Advanced Ball Bearing Turbocharger 3" Anti Surge TD05H-16KX Point Milling for HYUNDAI GENESIS COUPE Forged Pistions

Regular price $1,299.00



Description
- 10~12 Hyundai Genesis Coupe 2.0T BK1 (Bolt-on to replace factory TD04L turbo directly without modification. )
- 13~14 Hyundai Genesis Coupe 2.0T BK2 (Use the stock BK1 manifold and aftermarket O2 housings like ISR or MXP, please check the following case study) without modification.
- Horsepower: 350-450hp

The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.

Wheels Spec
- Compressor wheel: 49.6 / 68 mm 7+7 Point Milling
This high-performance 68mm compressor blends quick response and top-end power with OE reliability. The billet 16KX billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades for a max flow rate of 40lb/min. This turbo is capable of producing 400+whp with a built engine and supporting modifications.


Kinugawa Turbo Systems Third-order surface compressor wheel
Free Surface Ruled Surface
Process Point Milling Flank Milling
Machining Time Slow 120 mins.each Quick 15 mins.each
Characters


1. Free Surface can be only produced by Point Milling
2. More air pressure and increase much better flow efficiency.
3. Mainly for high-efficiency turbochargers.

1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor

- Turbine wheel: 49 / 57 mm ( 9blades STS )

Kinugawa STS Turbin Wheel
Feature: STS (Superior Turbine Strike) advanced cartridges come with dual ceramic ball bearing cages and 9 blades high flow turbine wheels improve the response speed (time needed to build boost) 10-15% as well as being more durable due to the improved shaft dynamics control. The increased power comes from the enhanced design. It utilizes an inner and outer race with rollers or balls between the two races. The inner race is pressed onto the turbo shaft, and the outer race is pressed into the CHRA. The rollers or balls replace the oil’s “job” of controlling the turbo shaft’s orientation but do still need to be lubricated but the oil restrictor had been defaulting embedded in the bearing housing to reduce oil supply more.

Bearing Type

- Dual Ceramic Ball Bearing


Cooling Type
- Oil and water cooling

Compressor Housing
- A/R 60 (inlet: 3" Anti-surge / outlet: 2")
An Anti-surge housing is a good " analog" way of curing part throttle surge issues on big turbo/mbc setups. It's why most really big turbos come with anti-surge housings, to begin with. 

 

Actuator - Default 1.0bar / 14.7 psi - We also can provide 0.5bar, 0.8bar, 1.2bar, 1.5bar,1.7bar, and 2.0bar actuator, please leave a comment when you ordered if you need to change it.

Situation 
- Brand New

The set includes
- 1 x turbocharger with adjustable actuator
- 1 x oil and water kit
- 1 x gasket set turbine housing in/out
- 4 x 86.5mm oversize pistons and rings ( Free Gift) 
Kinugawa Turbo Genesis Coupe 2.0t forged pistons set

kinugawa turbo genesis turbo forged pistons
kinugawa turbo hyundai genesis coupe forged pistons
Note: 86.5mm bore which the pistons to wall clearance 0.003mm 
- 1 x Balance Report with an Anti-Counterfeit Tag
Case Study
You can use the stock 2010~12 BK1 manifold and the aftermarket O2 housings like ISR or MXP to convert these 3" cover turbochargers on 2013~14 BK2. 
Replacement o2 housing (1st catalytic converter pipe) for the 2010-2012 Genesis Coupe 2.0L to free up valuable horsepower! Direct bolt-up to the OEM turbo and connect to the OEM or aftermarket downpipe.
kinugawa turbo hyundai genesis bk1 applied on bk2
kinugawa turbo hyundai genesis bk2 with 3" anti-surge bk1

Provider
- Kinugawa Turbo Systems

Guarantee
- One yearKinugawa Turbo Systems Compressor Map TD02-TD08
Kinugawa Turbo Systems SCHENK Balancer
Kinugawa Turbo Systems Anti-Counterfeit Tag
`