Kinugawa STS Advanced Ball Bearing Turbo 3" TD05H-16K 6cm T3 2.5" V-Band for Toyota Land Cruiser 1HZ Ultimate Fast Spool

Regular price $1,299.00

Application

- Kinugawa TOYOTA 1HZ 4.2L Diesel 330HP Limited

- 75/78/79/80/100 series TD05H-16KX with 6cm T3 V-Band Turbine housing, You need an exhaust manifold with a T3 flange if you want to install this turbocharger on a 1HZ Engine.

- Fits DTS Turbo Kit for 1HZ 75/80/100 series. Product code: HZJ75 DTS, 1HZ DTS, 100 DTS.

The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.

CHRA Size

- TD05H-16K

Wheels Spec

- Compressor wheel: 49.6 / 68.0 mm Point Milling Third-order Surface. This high-performance 68mm compressor blends quick response and top-end power with OE reliability. The billet 16K (aka 16KX) billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades.

Kinugawa Turbo Systems Third-order surface compressor wheel

	Free Surface	Ruled Surface
Process	Point Milling	Flank Milling
Machining Time	Slow 120 mins.each	Quick 15 mins. each
Characters	1. Free Surface can be only produced by Point Milling 2. More air pressure and increase much better flow efficiency. 3. Mainly for high-efficiency turbochargers.	1. Ruled Surface can be produced by Flank Milling 2. Low efficiency 3. Only suitable to the very easy design of compressor wheel 4. Mainly for fundamental mechanical engineering such as Centrifugal compressor

- Turbine wheel: 56 / 49.2 mm

Feature: The STS (Superior Turbine Strike) turbine wheel. It will take a shorter time (decrease 5-8%) to build a boost and, at higher RPM, prevent choking easier because it's less inertia and restrictive than an 11 or 12 blades turbine.

Compressor Housing

- Compressor inlet: 3 " Anti-surge AR 60

Turbines Housing

- A/R: 6 cm .41

- Turbine input: T3

- Turbine outlet: 2.5" v-Band internal wastegate

Bearing Type

- Dual Ceramic Ball Bearing system

Cooling Type

- oil and water cooling

Actuator Pressure

- Default 1.0bar. We offer 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar spring preinstalled, too. Please add a comment to your order if you need to change it.

Boost Level

- The peak pressure setup is limited: 2.8bar

- Suggested pressure setup: 1.5bar

The set includes

- 1 x Oil supply set

- 1 x water coolant and return set

- 1 x T3 gasket

- 1 x V-Clamp and V-Band Socket Adapter Kit

- 1 x Turbocharger

- 1 x Balance Report with Anti-Counterfeit Tag

Situation

- Brand New

- Full balance from Schenk MBRS 950 110 Germany

Provider

- Kinugawa Turbo Systems

Guarantee

- One year

Install kit instruction Kinugawa Turbo Toyota 1HZ Install kit instruction

Kinugawa Turbo Systems STS Advanced Fast Spool

Kinugawa Turbo Systems STS Advanced Ball Bearing

Kinugawa Turbo Systems Anti-Counterfeit Tag