Product description
This high-performance 75mm compressor blends quick response and top-end power with OE reliability. The billet 18KX (aka 18k)billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades for a max flow rate of 54lb/min. This turbo is capable of producing 500+whp with a built engine and supporting modifications.
Application
- Gasoline Engine: 2.5~4L
- Gasoline Engine: 2.5~4L
- Diesel Engine: 4~6L
- Horsepower Range: 400~500whp
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
CHRA Size
- TF06-18K
Wheels Spec
- Compressor wheel: 55.1 / 75 mm (7+7 Point Milling)


Free Surface | Ruled Surface | |
Process | Point Milling | Flank Milling |
Machining Time | Slow 120 mins.each | Quick 15 mins.each |
Characters |
1. Free Surface can be only produced by Point Milling |
1. Ruled Surface can be produced by Flank Milling 2. Low efficiency 3. Only suitable to the very easy design of compressor wheel 4. Mainly for fundamental mechanical engineering such as Centrifugal compressor |
- Turbine wheel: 54 / 61.5 mm (9 blades sts)
Note: The 9 blades STS (Superior Turbine Strike) turbine wheel. This will take a shorter time to build a boost and at higher RPM won't choke because it's less restrictive than an 11 or 12 blade turbine.
Compressor Housing
- Compressor inlet: 3 " with the speed sensor port
Turbine Housing
- Nissan RB20/25 T3 inlet / 6 bolts outlet with 3" V-band outlet adapter
Bearing Type
- Journal Bearing with a 360-degree performance thrust bearing kit
Cooling Type
- Oil and Water Cooling System
Actuator Pressure
- 1.0 bar default setting.
-We have 0.5bar, 0.8bar, 1.2bar, 1.5bar, 1.7bar, and 2.0bar spring settings, Please add a comment to your order if you need to change it.
The set includes
- 1 x Oil supply set
- 1 x water supply and return pipe set
- 1 x Return Oil Pipeline
- 1 x turbine inlet gasket and v-band outlet adapter
- 1 x Turbocharger
- 1 x Balance Report with Anti-Counterfeit Tag
Situation
- Brand New
- Full balance from SCHENK MBRS 110 Germany
Provider
-Kinugawa Turbo Systems
Guarantee
-One year
`