- For 09~12 Hyundai Genesis Coupe 2.0T. It Bolts-on to replace the factory TD04L turbo directly without modification.
- Horsepower: 350-450hp
The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration.
- Compressor wheel: 49.6 / 68 mm 7+7 Point Milling
This high-performance 68mm compressor blends quick response and top-end power with OE reliability. The billet 16KX billet compressor wheel utilizes their latest generation blade aero with 7 primary blades and 7 splitter blades for a max flow rate of 40lb/min. This turbo is capable of producing 400+whp with a built engine and supporting modifications.
||Slow 120 mins.each
||Quick 15 mins.each
1. Free Surface can be only produced by Point Milling
2. More air pressure and increase much better flow efficiency.
3. Mainly for high-efficiency turbochargers.
|1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor
- Turbine wheel: 49 / 57 mm ( 9blades STS )
Feature: STS (Superior Turbine Strike) advanced cartridges come with dual ceramic ball bearing cages and 9 blades high flow turbine wheels improve the response speed (time needed to build boost) 10-15% as well as being more durable due to the improved shaft dynamics control. The increased power comes from the enhanced design. It utilizes an inner and outer race with rollers or balls between the two races. The inner race is pressed onto the turboshaft, and the outer race is pressed into the CHRA. The rollers or balls replace the oil’s “job” of controlling the turbo shaft’s orientation but do still need to be lubricated but the oil restrictor had been defaulting embedded in the bearing housing to reduce oil supply more.
- Dual Ceramic Ball Bearing
- Oil and water cooling
Actuator - Default 1.0bar / 14.7 psi
- We also can provide 0.5bar, 0.8bar, 1.2bar, 1.5bar,1.7bar, and 2.0bar actuator, please leave a comment when you ordered if you need to change it.
- Brand New
The set includes
- 1 x turbocharger with BOV or BCV (2 Options choose 1)
- 1 x oil and water kit
- 1 x gasket set turbine housing in/out
- 4 x 86.5mm oversize pistons and rings (Gift) (#333-00218-001) pistons to wall clearance 0.003mm
- 1 x Balance Report with Anti-Counterfeit Tags
- Kinugawa Turbo Systems
- One year