- For Mitsubishi 4b11T EVO 10 / EVO X
- Japanese models: RS, GST
- North American models: GRS, MR, MR Premium, MR Touring, SE, Final Edition
- UK cars kept the Evolution X name.
- GS – Base Japanese GSR with Enkei or BBS wheels, 5-speed manual transmission\ radio and music server (MMCS), Rockford Fosgate premium audio.
- GSR SST (FQ-300, FQ-330) – GSR FQ-300 with 6-speed TC-SST transmission with SST mode selection (normal, sport, super sport). GSR SST FQ-330 was released in 2009
- FQ-300 – Engine rated at 300 PS (221 kW; 296 hp) at 6500 rpm torque 407 N⋅m (300 lb⋅ft) at 3500 rpm.
- FQ-330 – Engine rated at 329 PS (242 kW; 324 hp) at 6500 rpm torque 437 N⋅m (322 lb⋅ft) at 3500 rpm.
- FQ-360 – Engine rated at 359 PS (264 kW; 354 hp) at 6500 rpm torque 492 N⋅m (363 lb⋅ft) at 3500 rpm. Carbon fibre front lip spoiler, rear vortex generator, gear knob, hand brake. Front leather Recaro seats.
- FQ-440 MR
- Compressor wheel: 56.6 / 73 mm Cast 5+5 Free Surface or Billet 5+5 Extended Free Surface D526
|Ruled Surface||Free Surface|
|Process||Flank Milling||Point Milling|
|Machining Time||Quick 15 mins.each||Slow 120 mins.each|
|Characters||1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor
|1. Free Surface can be only produced by Point Milling
2. More air pressure and increase much better flow efficiency.
3. Mainly for high efficiency turbochargers.
- Turbine wheel: 54 / 61 mm
12cm ^ 2 Twin-scroll turbine housing with Hi-Ni 22%
- Journal Bearing
- 360 Performance Thrust Bearing Kits with large thrust rings and Flingers
Oil and water cooling
-1.0 bar / 14.7 psi Default.
-0.5bar, 0.8 bar, 1 bar, 1.2 bar, 1.5 bar, available 1.7 bar and 2.0 bar, please add a comment about your order if you need to change it.
400 ~ 500HP
Turbo Boost limit
2.8 bar (on the basis of the operating set with a large support bearing)
1.5 bar / 22 psi