The total amount is above $399, we offer free shipping and are responsible for import duties.

Kinugawa Turbocharger 3" Anti-Surge TF06-18K for Mitsubishi EVO 4-8 4G63T

Regular price $1,159.00

The TF06-18K Mitsubishi Evo 4-8 4G63 Upgrade Turbo is a stock location, bolt-on upgrade performance turbo upgrade. This is very similar to the EVO 10 18K, but it is a reverse rotation for the Evo 8 platform. The TF06-07 turbine wheel lives in a 10.5 cm turbine housing and is attached to a billet 18K compressor wheel for ultra-quick spooling. The compressor cover has a stock size inlet allowing for most any aftermarket intake and stock appearance. The 18K flows 54 lbs/min, making it a perfect upgrade for those who want a turbo with ultra-quick spool and plenty mid-range all the way to top-end power. It’s a substantial performance upgrade over stock – with easy to install stock fitment. The estimated engine output with this turbo is around 450WHP, but you can make 525-550whp+ with ethanol, fuel pump upgrade, manifold, intake, and custom tune. The turbo comes with a Kinugawa Big Head Adjustable Actuator holds the wastegate closed for quicker boost, then controls the opening to maintain peak boost for superior acceleration and mid-range towing or pulling power. The following is the summary of the bid head actuator.
  • Quick and Controlled Boost
  • Produces massive torque right from idle
  • Increases diaphragm area & spring pressure
  • Keeps valve seated longer achieving higher peak boost, sooner
  • Crisp acceleration and more mid-range pulling power

For more advantages please visit "Big Head vs. Normal Head"

-For Mitsubishi 4G63T EVO 4-8

Reverse TF06-18K 

Wheels Spec
- Compressor wheel: 55.1 / 75 mm (7+7 Point Milling / Third-Order Surface) 
Ruled Surface Free Surface
Process Flank Milling Point Milling
Machining Time Quick 15 mins.each Slow 120 mins.each
Characters 1. Ruled Surface can be produced by Flank Milling
2. Low efficiency
3. Only suitable to the very easy design of compressor wheel
4. Mainly for fundamental mechanical engineering such as Centrifugal compressor
1. Free Surface can be only produced by Point Milling
2. More air pressure and increase much better flow efficiency.
3. Mainly for high efficiency turbochargers.
- Turbine wheel: 61.5 / 54.1 mm (TF06 STS)
Turbines Housing
10.5 cm ^ 2  Twin-Scroll

Bearing Type
- Journal Bearing with a performance 360-degree thrust bearing kit.
Cooling systems
Oil and water cooling

Actuator Pressure
-1.0 bar / 14.7 psi default .
-0.5bar, 0.8 bar, 1 bar, 1.2 bar, 1.5 bar, available 1.7 bar and 2.0 bar, Please add a comment about your order if you need to change it.

Item included
- 1 x turbocharger
- 1 x oil and water install kit
- 1 x Balance report with an anti-counterfeit tag
Brand New

Kinugawa Turbo Systems

One year

Kinugawa STS Turbin Wheel

Kinugawa Turbo Systems Billet Compressor Wheel and 360 Dynamic Thrust Bearing

kinugawa tf06 comprssor map comparsion
Kinugawa Turbo Systems SCHENK Balancer
Kinugawa Turbo Systems Anti-Counterfeit Tag